Close Menu
CatchTheBullCatchTheBull
  • Home
  • Crypto News
  • Bitcoin
  • Altcoin
  • Blockchain
  • Airdrops News
  • NFT News
What's Hot

How to Use Aave: Beginner Step-by-Step Guide (2026)

November 22, 2026

1 ETH on a Card, Opened 6 Years Later

November 22, 2026

How Bybit, Ledger and DMM Got Hit (2026)

November 22, 2026
Facebook X (Twitter) Instagram
Facebook X (Twitter) Instagram
CatchTheBullCatchTheBull
  • Home
  • Crypto News
  • Bitcoin
  • Altcoin
  • Blockchain
  • Airdrops News
  • NFT News
CatchTheBullCatchTheBull
Airdrops News

How to Use Aave: Beginner Step-by-Step Guide (2026)

By WebDeskNovember 22, 202614 Mins Read
Share
Facebook Twitter LinkedIn Pinterest Email

To use Aave, connect a self-custody wallet to the Aave app and supply a token as collateral. Then borrow a stablecoin against it. Later, you repay the loan plus interest and withdraw your collateral. That is the whole loop.

Aave is my go-to when I need some quick USDT. Most of my money sits in holds like BTC and SOL. Honestly, I don’t want to sell a long-term bag for short-term cash. So instead, I borrow, use the stablecoins, and pay the loan back later.

In this guide, I walk you through every click with one example: wBTC as collateral and USDT as the loan. After that, you will learn how the health factor works and what can go wrong. Finally, I show you how to get your funds back out.


What Is Aave?

Aave is the largest lending protocol in DeFi. It runs on smart contracts, so no company approves your loan. Instead, code holds the deposits and enforces the rules.

The model has two sides. First, suppliers deposit tokens into a pool and earn interest. Second, borrowers lock collateral and take loans from that same pool. Because every loan is overcollateralized, you always deposit more value than you borrow.

That design means no credit checks and no paperwork. However, it also means no customer service. If your loan gets liquidated, nobody reverses it. New to the basics? Then read our DeFi and yield farming explainer first.

Aave runs on Ethereum and on cheaper networks such as Arbitrum and Base. In short, the steps below work the same on each one.


What You Need Before You Start

Get four things ready before you open the app.

  1. A self-custody wallet. Rabby and MetaMask both work. Our list of the best wallets for airdrops compares the main options.
  2. Gas money. Every action costs a small fee in the network’s gas token. On Ethereum, Arbitrum and Base, that token is ETH. Our Ethereum gas fees guide explains how those fees work.
  3. Collateral. This is the token you lock up. In this guide, it is wBTC.
  4. One network. Pick the chain you will use and keep everything on it. On Ethereum mainnet, fees eat small positions fast. For that reason, beginners often start on a cheaper network.

Do your coins sit on an exchange right now? In that case, withdraw them to your wallet first. Our guide on self custody versus keeping coins on an exchange covers the tradeoffs.


Using BTC on Aave? You Need wBTC First

Aave cannot hold native Bitcoin. Bitcoin lives on its own blockchain, while Aave runs on Ethereum-style networks. So if you want to borrow against BTC, you first need a wrapped version.

What is wBTC?

wBTC, or Wrapped Bitcoin, is a token on Ethereum backed 1:1 by real BTC. A custodian holds the actual Bitcoin. In return, an equal amount of wBTC exists onchain. When someone redeems wBTC, the custodian releases the BTC and burns the tokens.

In practice, you rarely deal with the custodian. Most people simply swap ETH or a stablecoin for wBTC on a DEX. Alternatively, check whether your exchange supports WBTC withdrawals on your chosen network.

The risk of wBTC

wBTC is only as good as the custodian behind it. Basically, you trust a company to actually hold the Bitcoin. If that custody fails, the token could lose its peg to BTC. Then your collateral drops even if Bitcoin itself doesn’t.

That trust question became real in 2024. BitGo, the custodian, moved wBTC custody into a joint venture with BiT Global, a partner tied to Justin Sun. As a result, MakerDAO (now Sky) voted to cut its wBTC exposure.

Aave also lists other Bitcoin wrappers, such as Coinbase’s cbBTC. Still, each one carries the same basic tradeoff. You swap Bitcoin’s self-custody for a custodian’s promise. Therefore, size your wBTC position with that in mind.


Step 1: Connect Your Wallet to Aave

Phishing sites copy Aave all the time. Fake “Aave airdrop” pages drain wallets the moment you sign. For that reason, type app.aave.com yourself and bookmark it. Also, never click an Aave link from a DM or an ad.

Now connect:

  1. Open app.aave.com in your browser.
  2. Next, click Connect wallet in the top right corner.
  3. Then pick your wallet and approve the connection pop-up.
  4. After that, open the market selector at the top of the page and choose your network, for example Arbitrum.
  5. Finally, make sure your wallet sits on that same network.

You now see the Dashboard. On the left sit Your supplies and Assets to supply. On the right, you find Your borrows and Assets to borrow.

For more ways to spot fake sites, check our airdrop safety page.


Step 2: Deposit (Supply) wBTC

Aave calls a deposit a “supply”. Your wBTC goes into the pool, and it starts earning a small interest rate right away.

  1. Under Assets to supply, find WBTC.
  2. Click Supply on that row.
  3. Type the amount, or hit Max to use all of it.
  4. Then click Approve WBTC to continue and confirm in your wallet. This gives Aave permission to move your wBTC.
  5. Once that clears, click Supply WBTC and confirm again.

The approval only happens once per token. Next time, you skip straight to the supply step.

After a few seconds, wBTC shows up under Your supplies. In return, your wallet holds an aToken, a receipt that tracks your deposit plus interest. Don’t send that receipt anywhere, because it is your claim on the deposit.


Step 3: Turn wBTC On as Collateral

Supplying and using as collateral are two different things. Only collateral lets you borrow.

  1. Look at your WBTC row under Your supplies.
  2. Find the Collateral switch on that row.
  3. If it is gray, click it and confirm in your wallet.
  4. Once it turns green, your wBTC counts toward your borrowing power.

Most assets switch on automatically after the first supply. Even so, check it every time. Some assets run in “isolation mode”, which limits what you can borrow against them.

Also note that you can’t withdraw all your collateral while a loan is open. Instead, Aave keeps enough locked to cover the debt.


Step 4: Borrow USDT

This is the step most people come for.

  1. Under Assets to borrow, find USDT.
  2. Click Borrow on that row.
  3. Type how much USDT you want.
  4. Before you confirm, watch the Health factor line in the pop-up. It updates as you type.
  5. Then click Borrow USDT and confirm in your wallet.

The USDT lands in your wallet within seconds. From there, it is yours to use.

My advice: never borrow the maximum Aave allows. The app happily lets you go right to the edge. However, a small dip in BTC then puts you in liquidation range. So borrow well below your limit and keep a buffer.

Interest starts the moment you borrow. On Aave, the rate is variable, so it moves with demand. Usually it moves slowly. During a crisis, though, it can jump fast.


How the Aave Health Factor Works

The health factor is one number that shows how safe your loan is. Above 1, you are safe. Below 1, anyone can liquidate part of your collateral.

Aave calculates it like this:

Health factor = (collateral value × liquidation threshold) ÷ borrowed value

The liquidation threshold is a percentage Aave sets per asset. In other words, it tells you how much of your collateral counts before liquidation kicks in. You find it on each asset’s page under Markets.

Example with wBTC and USDT

Say you supply $10,000 of wBTC. For simple math, assume a 75% liquidation threshold. Check the real number for your market, since it differs per asset and network.

  • Borrow $3,000 USDT: (10,000 × 0.75) ÷ 3,000 = health factor 2.5
  • Borrow $5,000 USDT: (10,000 × 0.75) ÷ 5,000 = health factor 1.5

Now the important part: how far can BTC fall?

  • At a 2.5 health factor, liquidation starts when your wBTC is worth $4,000. That is a 60% drop.
  • With a 1.5 health factor, liquidation starts at about $6,667. That is only a 33% drop.

A 33% drop sounds big. Yet BTC has done it many times. That is why Aave’s own help pages suggest a buffer, for example a health factor above 2.

What moves your health factor

Three things lower it: a falling collateral price, interest added to your debt, and new borrows. On the other hand, repaying debt, adding collateral and a rising collateral price all raise it.

So if the number slides toward 1.2, act. Either repay some USDT or supply more wBTC. For the full picture, click Risk details next to your health factor at the top of the dashboard.


Step 5: Repay Your Loan

When you are done with the USDT, pay it back. You owe the amount you borrowed plus interest.

  1. Under Your borrows, find your USDT row.
  2. Click Repay.
  3. Choose to repay from your wallet balance.
  4. Type the amount, or hit Max to clear the full debt including interest.
  5. Next, click Approve USDT to continue and confirm.
  6. Finally, click Repay USDT and confirm again.

Keep a little extra USDT in your wallet. Interest ticks up every block, so the exact debt grows slightly while you click through.

Aave also lets you repay with your collateral. In that case, it swaps some wBTC to cover the loan. That is handy, but it sells part of your bag. For that reason, beginners should stick with the wallet option.

You don’t have to repay all at once either. Partial repayments work too, and each one lifts your health factor.


Step 6: Withdraw Your wBTC

With the loan repaid, your collateral is free again.

  1. Under Your supplies, find WBTC.
  2. Click Withdraw.
  3. Hit Max to take everything out.
  4. Then click Withdraw WBTC and confirm in your wallet.

The wBTC lands back in your wallet, including the small interest it earned.

Still have an open loan? Then Aave only lets you withdraw part of it. The pop-up shows your new health factor before you confirm, so check that number first.

There’s one more catch. Withdrawals need free liquidity in the pool. When borrowers have taken nearly everything out, withdrawals can stall until they repay. That happened on Aave during the KelpDAO crunch, which I cover in the risks section.


Step 7: Transfer Your Funds Out

Your borrowed USDT and your withdrawn wBTC now sit in your wallet. From there, you can send them anywhere.

  1. On your exchange, open Deposit, pick USDT, and choose the network you used on Aave, for example Arbitrum.
  2. Copy the deposit address.
  3. In your wallet, click Send, pick USDT, and paste the address.
  4. Next, send a small test amount first.
  5. Once it arrives, send the rest.

The network has to match on both sides. If you send USDT on Arbitrum to an address that expects Ethereum mainnet, the funds may not arrive.

Moving funds between networks instead? Then you need a bridge. Before you use one, read our guide on what a crypto bridge is and the risks involved.


The Risks of Using Aave

Aave is one of the most battle-tested protocols in crypto. Still, battle-tested does not mean risk-free.

Liquidation

This is the big one. If your health factor drops below 1, liquidators repay part of your debt and take your collateral at a discount. As a result, you lose more wBTC than the debt was worth. Plus, it happens automatically, often within seconds of a sharp drop.

Bad debt and frozen withdrawals

In April 2026, an attacker exploited KelpDAO’s bridge and minted unbacked rsETH. Next, they deposited it on Aave and borrowed real ETH against it. Nobody hacked Aave’s own contracts. Even so, the protocol faced bad debt and billions in withdrawals. Meanwhile, USDT borrow rates spiked to around 15%. Our KelpDAO exploit breakdown has the full story.

The lesson? One bad collateral asset can hit every user of the pool. For more cases like this, see our overview of DeFi hacks.

Variable rates

Your borrow rate floats. If demand for USDT spikes, your loan gets more expensive overnight. So check the rate now and then, not only on day one.

Collateral risk

Your collateral can fail on its own. With wBTC, that means custodian risk, as explained above. With staked or bridged tokens, it means extra contract and bridge risk.

Phishing and swap mistakes

Fake Aave sites and fake airdrop claims are everywhere. Additionally, the Aave app has a built-in swap that punishes careless clicks. One trader turned about $50 million into roughly $36,000 of AAVE after clicking through a warning. Read the Aave 50 million mistake before you ever swap a big amount there.


Aave V3 vs V4: Which Version Should You Use?

Aave now runs two versions side by side. V3 lives on the main app at app.aave.com. Meanwhile, V4 launched on Ethereum in March 2026 and uses a separate interface called Aave Pro.

V4 adds a new “hub and spoke” design and markets like tokenized stocks as collateral. Those are interesting, but they target advanced users. For a first loan, the main app covers everything in this guide.

Prefer to just earn interest on stablecoins without borrowing? Then check our Aave App listing for the simpler savings route.


Going Further: Looping and Farming With Aave

Once you know the basic loop, you can stack strategies on top. The most common one is looping: borrow, redeposit, repeat.

Personally, I only ever do one loop. I stake, use the staking token as collateral, borrow ETH, and stake that again. Some people I know go six or seven levels deep, but small moves can liquidate those positions. Our looping strategies guide shows the math behind each level.

On top of that, lending positions earn points on many newer protocols. That makes them a core piece of capital-efficient farming, where the same money earns yield and airdrop exposure together. To remove price risk from a farm, pair it with a delta neutral setup. And if you would rather earn trading fees, start with our liquidity pool farming guide.

For the full playbook, see our airdrop farming guide.


Keep This Content Free

Every click in this Aave walkthrough is here to save you a costly mistake. Thanks to readers like you, it stays free. Need USDT, ETH or BTC to get started? Then grab it on OKX or Bybit through our links. It costs you nothing extra and keeps the site running.


Final Words

Aave turns a long-term bag into short-term cash without selling it. For me, that is exactly why it’s my go-to for quick USDT. My BTC and SOL holds stay put, while the loan does the work.

The rules stay simple. Borrow far below your limit, watch your health factor, and understand what you post as collateral. With wBTC, that includes trusting a custodian. Finally, repay before rates or prices turn against you.

Start small on your first loan. Then scale up once every step feels routine.


Hyperliquid Referral Code “AirdropAlert” 4% Off Fees, Applied Before Your First Trade

FAQ

Is Aave safe for beginners?

Aave is one of the oldest and largest lending protocols, and its core contracts have a strong track record. However, beginners still face liquidation, smart contract and collateral risk. So start small and keep your health factor high.

What happens if my health factor drops below 1?

Liquidators can repay part of your debt and take your collateral at a discount. You keep the borrowed funds, but you lose more collateral than the debt was worth.

Can I use real Bitcoin on Aave?

No. Aave runs on Ethereum-style networks, so you need a wrapped token such as wBTC. That adds custodian risk on top of Bitcoin’s price risk.

Do I have to repay my Aave loan by a deadline?

No, Aave loans have no fixed end date. However, interest keeps building, which slowly lowers your health factor.

How much can I borrow on Aave?

That depends on the loan-to-value ratio Aave sets for your collateral. Still, borrowing the maximum leaves no buffer. A health factor around 2 or higher is a common safety target.

Can I lose money on Aave without being liquidated?

Yes. Interest costs add up, wBTC can lose its peg, and swaps inside the app can go badly wrong. Bad debt events can also freeze withdrawals for a while.

Do I need ETH to use Aave?

You need the network’s gas token for every transaction. On Ethereum, Arbitrum and Base, that token is ETH.

Credit: Source link

Previous Article1 ETH on a Card, Opened 6 Years Later

Related Posts

1 ETH on a Card, Opened 6 Years Later

November 22, 2026

How Bybit, Ledger and DMM Got Hit (2026)

November 22, 2026

A Crypto OG on Netflix’s FTX Show

November 21, 2026
Add A Comment
Leave A Reply Cancel Reply

Top Posts

How to Use Aave: Beginner Step-by-Step Guide (2026)

November 22, 2026

1 ETH on a Card, Opened 6 Years Later

November 22, 2026

How Bybit, Ledger and DMM Got Hit (2026)

November 22, 2026

Subscribe to Updates

Get the latest Crypto, Blockchain and Airdrop News from us to Catch The Bull.

Advertisement Banner

Welcome to CatchTheBull, your trusted source for the latest Crypto News and Airdrops. We bring you real-time updates, expert insights, and opportunities to stay ahead in the crypto world. Discover trending projects, market analyses, and airdrop details all in one place.

Join us on this journey to navigate the ever-evolving blockchain universe!

Facebook X (Twitter) Instagram YouTube
Top Insights

Fees, Safety and Features Compared

What One Point Is Worth After $1.5B

ANT at $83, Crypto Perps Say $100

Get Informed

Subscribe to Updates

Get the latest Crypto, Blockchain and Airdrop News from us to Catch The Bull.

© 2026 CatchTheBull. All Rights Are Reserved.
  • Contact Us
  • Privacy Policy
  • Terms of Use
  • DMCA

Type above and press Enter to search. Press Esc to cancel.

  • bitcoinBitcoin(BTC)$60,671.002.37%
  • ethereumEthereum(ETH)$1,702.191.88%
  • tetherTether(USDT)$1.000.01%
  • binancecoinBNB(BNB)$553.923.15%
  • usd-coinUSDC(USDC)$1.000.00%
  • rippleXRP(XRP)$0.921.43%
  • solanaSolana(SOL)$70.060.81%
  • tronTRON(TRX)$0.3049030.52%
  • Figure HelocFigure Heloc(FIGR_HELOC)$1.073.36%
  • HyperliquidHyperliquid(HYPE)$62.774.27%
  • zcashZcash(ZEC)$792.071.48%
  • moneroMonero(XMR)$485.903.16%
  • dogecoinDogecoin(DOGE)$0.0550021.28%
  • leo-tokenLEO Token(LEO)$9.160.51%
  • whitebitWhiteBIT Coin(WBT)$58.181.93%
  • chainlinkChainlink(LINK)$8.772.87%
  • USDSUSDS(USDS)$1.00-0.03%
  • cardanoCardano(ADA)$0.1451562.76%
  • Ethena USDeEthena USDe(USDE)$1.000.01%
  • stellarStellar(XLM)$0.1285861.25%
  • daiDai(DAI)$1.00-0.01%
  • bitcoin-cashBitcoin Cash(BCH)$197.721.40%
  • nearNEAR Protocol(NEAR)$2.995.32%
  • litecoinLitecoin(LTC)$39.680.48%
  • avalanche-2Avalanche(AVAX)$6.672.32%
  • CantonCanton(CC)$0.074002-1.35%
  • Ripple USDRipple USD(RLUSD)$1.00-0.01%
  • tether-goldTether Gold(XAUT)$3,546.370.51%
  • uniswapUniswap(UNI)$4.693.96%
  • USD1USD1(USD1)$1.000.01%
  • the-open-networkGram (prev. Toncoin)(GRAM)$0.982.41%
  • suiSui(SUI)$0.662.71%
  • Global DollarGlobal Dollar(USDG)$1.00-0.01%
  • Ondo US Dollar YieldOndo US Dollar Yield(USDY)$1.150.16%
  • RainRain(RAIN)$0.003287-6.30%
  • paypal-usdPayPal USD(PYUSD)$1.00-0.03%
  • hedera-hashgraphHedera(HBAR)$0.0515311.01%
  • BittensorBittensor(TAO)$191.753.87%
  • shiba-inuShiba Inu(SHIB)$0.0000041.84%
  • crypto-com-chainCronos(CRO)$0.0409250.87%
  • quant-networkQuant(QNT)$142.224.63%
  • Spiko Amundi Overnight Swap Fund (EUR)Spiko Amundi Overnight Swap Fund (EUR)(EURSAFO)$1.120.00%
  • Circle USYCCircle USYC(USYC)$1.140.00%
  • MemeCoreMemeCore(M)$0.76-1.57%
  • Falcon USDFalcon USD(USDF)$1.000.00%
  • okbOKB(OKB)$80.833.07%
  • United StablesUnited Stables(U)$1.000.07%
  • pax-goldPAX Gold(PAXG)$3,549.240.46%
  • BlackRock USD Institutional Digital Liquidity FundBlackRock USD Institutional Digital Liquidity Fund(BUIDL)$1.000.00%
  • aaveAave(AAVE)$98.64-1.39%